This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
Text excerpt from page 23 (click to view)
2-7. Replacement of Board
2-7-2. Replacement of CN-1190 Board
n Every electrical part mounted on the CN-1190 board cannot be repalced. If there is any defective part, replace the board itself. 1. Remove the right and left side panels referring to Section 2-1. 2. Pull out the three plug-in boards, MD-103, AU-211 and TR-90.
5. Remove the four screws and remove the rail bracket.
B2.6 X 5
Rail bracket
B2.6 X 5
6. Remove the two screws securing the CN-1190 board. Disconnect the two flexible card wires referring to Section 2-6.
Flexible card wire
MD-103
TR-90 AU-211
3. Disconnect CN2 from the DM-98 board. Remove the three screws and remove the spacers and the DM-98 board. If the option board DM-99 is installed, carry out Step 4. 4. Disconnect CN2 from the DM-99 board. Remove the three screws and remove the spacers and the DM-99 board.
CN2 B3 X 4 B3 X 4 DM-99 (option)
Precision P2 X 5 CN-1190
7. Install a new board in the reverse procedures of the removal.
